This skid was designed with aT-Magmagnetic drive centrifugal sealless pump,WEGexplosion proof motor,Pentairfilters and housings andDixoncam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was mounted on a stainless steel base with polypropylene piping and valves. The cam and groove fittings were used to connect up to a hose for the flooded suction and the discharge into the customers tote. There are two pre-filters and two final filters in parallel.
